(Sipura SPA-1001) Configuration Wizard

Step 1 - Enter the IP address of your adaptor

We need to know the IP address of your Sipura adaptor, which you will enter below. To determine your adaptor's IP address, pick up a telephone handset connected to the SPA, dial "****" (that's the star symbol four times), at the voice prompt dial "110#". Your adaptor will read back its IP address to you. Enter the address, including the dots, below, overwriting the "0.0.0.0" entry: SPA LAN IP Address:

Step 2 - Select your Service Provider

We need to know which service provider you would like to configure your Sipura adaptor to work with. Select from one of the following below:  Adam Telefonia IP (Spain)  AdvanceCall (Germany)  Annatel (France)  ATP (Australia - NSW)  ATP (Australia - QLD)  ATP (Australia - SA)  ATP (Australia - VIC)  ATP (Australia - WA)  AXVoice  Bankoi  BusinessCom Networks  Broadeon Communications  BroadVoice Central US  BroadVoice East Coast US  BroadVoice West Coast US  DialDigit  DialPad  Free World Dialup (No NAT)  Free World Dialup (fwdnat proxy)  Free World Dialup (NAT with STUN)  Go2Call  Go2Call (NAT)  Gossiptel  Gossiptel (STUN)  Gradwell  Gradwell (NAT)  iConnectHereMake and Receive Calls  iConnectHere Outbound Only  InPhonex  INX Logical Exchange  iTele (Faroe Islands)  Litespan  Musimi (Denmark)  Mutualphone          (NAT)  Nikkom  Nikotel  NuFone  PeopleCall  PhoneGnome  Race Technlogies  Rubicon Networks  Samsung Networks (Korea)  SkyNET Telesystems  Sipgate.de  Sipgate.de (NAT)  Sipgate.co.uk (STUN)  SIPphone (STUN)  Stanaphone  swissipcom (Switzerland)  Telefin (Denmark)  TeleVoIP  Terracall  TrueVoIP  vBuzzer   (Chicago)   (Houston 1)   (Houston 2)   (New Jersey)   (New York)   (Richmond)   (San Jose)  Virgina Broadband  Vozsip  VoiceEclipse  VoicePulse Connect  VoicePulse Open Access  VoIPTalk (a.k.a. TelAppliant)  VoIP User (voipuser.org)      (softphone account)   Voxee  WorldDialPoint (Australia) If you are a service provider, support open device configurations, and would like to be included in this configuration wizard, or we are providing incorrect service configuration information, please contact us and we will do our best to correct the situation. Step 3 - Enter your caller ID display name In the box below, enter the name you would like the recipients of your call to see if they have Caller ID. Note: Even though you may enter a Caller ID display name on this form, not all service providers support the feature. Your Display Name:  Step 4 - Enter your user ID You'll need to enter the User ID, as given to you by your service provider, in the box below: User ID:  Step 5 - Enter your Auth ID (not usually required) This will be blank unless you use the Auth ID for something other than the SIP username. In that case, enter the SIP username in the box below:. Auth ID:  Step 6 - Enter your password You'll need to enter your password, exactly as given to you by your service provider, in the box below: Password:  Step 7 - Enter your Dial Plan The Dial Plan tells your SPA what numbers are allowed to be dialed. It also allows you to do things like 7-digit dialing. In the Dial Plan field below, we've entered a generic Dial Plan that will work with the majority of providers. It allows you to dial an arbitrary number of digits, dial * then any number of digits, dial ** then any number of digits, and # then any number of digits). If you want a North American-style dialplan that offers 7-digit dialing, 11-digit dialing for North America calls, and standard PSTN-style international dialing (dial 011, country code, area code and number), cut and paste the following dialing plan into the Dial Plan field. You will need to then adjust the plan as follows: Replace 1415 with your Country Code (US = 1) and Area Code (415). For example, to use US area code 360, replace 1415 to 1360. Replace 011 with your international access code. (<:1415>[2-9]xxxxxx|011xx.|1[2-9]xx[2-9]xxxxxx) If you are in the US and want 10-digit dialing instead of 7-digit dialing: (<:1>[2-9]xx[2-9]xxxxxx|011xx.|1[2-9]xx[2-9]xxxxxx) The BroadVoice sanctioned dial plan is: (*xx|#xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.) The iConnectHere sanctioned dial plan is: (*xx*xxxxxxxxxxx.|*x*xxxxxxxxxxx.|[3469]11|0|00|[2-9]xxxxxx|xxxxxxxxxxxx.) A suggested dial plan for Musimi is: (112|00[0-9].|*xx|*31*00x.|*31*xxxxxxxx|xxxxxxxxS0) A suggested dial plan for INX and others who put no prefix before the Country Code is: (1[2-9]xx[2-9]xxxxxxS0|[2-9]xxxxx.) The dial plan used for Annatel is: (0[1-9]xxxxxxxxS0|00[1-9]x.|26[1-9]x.|*xx.|x|*xx*x.|*xxx*x.) The dial plan used for ATP is: (*xx | <:TOMB>000 | <:OTMB>13xxxx | <:02>xxxxxxxx | xxxxxxxxxx | xxxxxx | xxxxxxxxxxxxxxxxxx | 190*.!) The dial plan used for Broadeon Communications is: (*[*x]x|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.) The dial plan used for iTele is: (xxxxxx|112|00x.|*6*xxxxxx|*6*00x.|*xx) The dial plan used for swissipcom is: (0[1-9]xxxxxxxx|00xxxxxxxxxxx.|[2-9]) Dial Plan:  Step 8 - Select a phone line The Sipura SPA-2000 includes ports for two separate telephones, each of which can be configured independently with separate services. If you have a SPA-2000, choose which of the phone lines on the unit you wish to configure. If you're using a single-port SPA-1000, choose Line 1.  Phone Line 1          Phone Line 2 Step 9 - Set Your Timezone Select the timezone you wish your device to display the time for Caller ID in terms of. You can only set this on completely unlocked devices, so for a partially locked device, make sure you select "No Time Zone". Note that these timezones do not take into account Daylight Savings Time. No Time Zone  GMT -12 GMT -11 GMT -10 GMT -9 GMT -8 GMT -7 GMT -6 GMT -5 GMT -4 GMT -3.5 GMT -3 GMT -2 GMT -1 GMT GMT +1 GMT +2 GMT +3 GMT +3.5 GMT +4 GMT +5 GMT +5.5 GMT +5.75 GMT +6 GMT +6.5 GMT +7 GMT +8 GMT +9 GMT +10 GMT +11 GMT +12 GMT +13 Step 10 - Configure your adaptor Once you've entered the information above and checked to see if it is correct, click on the "Configure My SPA" button below. A new window will open allowing you to upload the configuration options directly to your adaptor. If you would like to re-enter the settings information, you may clear this form by clicking on the "Reset Form" button.