Idea mobile internet access on pc/laptop settings

Connectivity via bluetooth

 
 

Requirements:

• Bluetooth Dongle & its Driver CD.
  
• Bluetooth Enabled H/S.
  

How To?

1. Insert CD in the system & install the software.
   
2. Restart the system.
   
3. Insert Bluetooth in the system & let the system install the Hardware.
   
4. Start the Bluetooth of the H/S.
   
5. Pair Device with the system.
   
6. Go to Control Panel > Select Phone & Modems > Select the Required Modem (Bluetooth DUN Modem) > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, "IP", "INTERNET")
   
7. Press OK.
   
8. Come back to the Bluetooth Window.
   
9. Right Click on the H/S icon & select Refresh Services.
   
10. Now Click on Bluetooth Dial-Up networking in the Top List of available services.
    
11. Accept Connection in H/S.
    
12. The system will automatically ask for Dial...just click on it & the system will get connected to NET automatically.
    

Connectivity via datacable

 
 

Requirements:

• Data Cable (Serial or USB; compatible as per H/S model)
  
• PC Suite & Driver of that particular H/S (Normally a CD is provided with the Data Cable itself) Appropriate Windows as per Data Cable.
  

 
 

How To?

1. Insert CD in the system & install the software.
   
2. Restart the system.
   
3. Insert Data Cable in H/S & then to the PC/Laptop.
   
4. Let the System install the Hardware.
   
5. Go to Control Panel > Select Phone & Modems > Select the Required Modem (e.g. Nokia USB; Samsung Cable etc.) > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, "IP", "INTERNET"). 
   
6. Press OK.
   
7. Now Select Network Connections in Control Panel.
   
8. Click on "Create new Networt".
   
9. A wizard will start up. Click next.
   
10. Select "Connect to Internet". Click next.
    
11. Select "Set up my connection manually". Click next.
    
12. Select "Connect using a Dial-up Modem". Click next.
    
13. Select Your Modem. Click next.
    
14. ISP Name: (Any name could be written). Click next.
    
15. Phone Number: *99#. Click next.
    
16. Leave User Name, Password, and Confirm Password fields blank. Click next.
    
17. Click on "Add a shortcut to Desktop". Click on Finish.
    
18. The system will automatically ask for Dial...just click on it & the system will get connected to NET automatically.
    

 
 

Pasted from <http://www.ideafresh.com/gprs_settings.php>

 
 

Idea gprs settings +!

*Idea gprs settings!

*For Updated GPRS settings, and free downloads, visit The All New HC Times! athttp://hctimes.xtgem.com 

#Account Name - idea_GPRS 

#Username - <Blank> 

#Password - <Blank> 

#Homepage - http://wap.ideafresh.com 

#Proxy and Server Port - 8080 

#Proxy and Server adress - 10.4.42.45 

#Databearer - GPRS / Packetdata 

#Acces Point Name - imis 

#Proxy - Enabled/yes 

#Authentication Type - Normal

 
 

Complete List :

OTA Settings

OTA Settings for OMA handsets     GPRS Settings Connection name: IDEA_GPRS  Data Bearer: GPRS  Access point name: imis  User name:  Prompt password: No  Password:  Authentication: Normal  Homepage:http://wap.ideafresh.com Connection security: Off  Session mode: Permanent  Proxy serv. address: 10.4.42.15:8080      Select Services, Choose IdeaFreshGPRS as the default access point.      MMS Settings     Connection name: IDEA_MMS Data Bearer: GPRS  Access point name: mmsc  User name:  Prompt password: No  Password:  Authentication: Normal Homepage = http://10.4.42.21:8002 Proxy serv. address: 10.4.42.15:8080      Select IDEA_MMS as default Access point in Multimedia settings.     AFTER THIS SWITCH OFF, THEN ON AND USE WAP BROWISNG + MMS.      OTA Settings for OTA handsets     There are certain mandatory parameters for GPRS/MMS settings which needs to configure in every handset to enable it for GPRS/MMS servcies. These parameters are;     GPRS Settings     APN = imis ( in small letters) Data Bearer = GPRS Proxies = Enable IP Address/Proxy Address = 10.4.42.15 Port No./Proxy Port No. = 9201 ( for WAP 1.0 handset ), 8080 (for WAP 2.0 handset) Homepage = http://www.ideafresh.com         MMS Settings     APN = mmsc (in small letters) Data Bearer = GPRS Proxies = Enable IP Address/Proxy Address = 10.4.42.15 Port No./Proxy Port No. = 9201 ( for WAP 1.0 handset), 8080 (for WAP 2.0 handset) Homepage = http://10.4.42.21:8002 Alongwith this there is one more setting which is required for handset to be used as modem;         GPRS Modem Settings     GPRS = When Needed APN = internet (in small letters) Out of the above, some parameters which are optional for some handsets like Proxies and Port No. These depend upon the handset capability itself. In GPRS settings, the profile name or the connection name can be any thing. Normally for WAP, we keep IdeaFreshGPRS and for MMS, it is IDEA_MMS. These GPRS settings can be at different places in different handsets e.g. in Nokia, this is at Services, in Samsung, this is at FunBox, in Sony Ericsson, in Data Connection/Wap Browing..and so on. And the MMS settings are normally at the Multimedia Message Settings part. So you need to find the proper place to feed in the right settings at right place.

To access wireless Internet you require A GPRS handset (There are many GPRS handsets available in the market today). Subscription to IDEA services. Laptop or PDA or any other device you want wireless connectivity to. Bluetooth/data cable/Infrared through which you can achieve connectivity between you handset and the other device.     To activate shackle free wireless Internet service by using your GPRS handset as a Modem Just contact our customer care on 12345 from your mobile phone or 9812012345 from anywhere and ask them to provision you for wireless Internet. Activating Idea Wireless Internet on your Laptop.     Adding a modem     To install a Modem driver, you must first install the Modem Setup Program on your Laptop/ PC from the CD provided with your mobile. During installation, keep your handset connected with the PORT (Bluetooth) of the device or thru data cable or thru Infrared. After installation, restart your Laptop/ PC.     Connectivity via bluetooth     Requirements: Bluetooth Dongle & its Driver CD. Bluetooth Enabled H/S. How To? Insert CD in the system & install the software. Restart the system. Insert Bluetooth in the system & let the system install the Hardware. Start the Bluetooth of the H/S. Pair Device with the system. Go to Control Panel > Select Phone & Modems > Select the Required Modem (Bluetooth DUN Modem) > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, "IP", "INTERNET") Press OK. Come back to the Bluetooth Window. Right Click on the H/S icon & select Refresh Services. Now Click on Bluetooth Dial-Up networking in the Top List of available services. Accept Connection in H/S. The system will automatically ask for Dial...just click on it & the system will get connected to NET automatically. Connectivity via datacable     Requirements: Data Cable (Serial or USB; compatible as per H/S model) PC Suite & Driver of that particular H/S (Normally a CD is provided with the Data Cable itself) Appropriate Windows as per Data Cable.     How To? Insert CD in the system & install the software. Restart the system. Insert Data Cable in H/S & then to the PC/Laptop. Let the System install the Hardware. Go to Control Panel > Select Phone & Modems > Select the Required Modem (e.g. Nokia USB; Samsung Cable etc.) > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, "IP", "INTERNET").  Press OK. Now Select Network Connections in Control Panel. Click on "Create new Networt". A wizard will start up. Click next. Select "Connect to Internet". Click next. Select "Set up my connection manually". Click next. Select "Connect using a Dial-up Modem". Click next. Select Your Modem. Click next. ISP Name: (Any name could be written). Click next. Phone Number: *99#. Click next. Leave User Name, Password, and Confirm Password fields blank. Click next. Click on "Add a shortcut to Desktop". Click on Finish. The system will automatically ask for Dial...just click on it & the system will get connected to NET automatically. Connectivity via Infra-Red     Requirements: Infrared enabled H/S. Infrared port & its driver if the system has no in-built Infrared. How To?: Insert CD in the system & install the software. Restart the system. Insert Infrared port in the system & let the system install the Hardware. Start the infrared of the H/S. The System will automatically detect & install "Standard Modem over IR Link" Go to Control Panel > Select Phone & Modems > Select the Required Modem > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, "IP", "INTERNET") Press OK Now Select Network Connections in Control Panel Click on "Create new Network". A wizard will start up. Click next. Select "Connect to Internet". Click next. Select "Set up my connection manually". Click next. Select "Connect using a Dial-up Modem". Click next. Select Your Modem. Click next. ISP Name: (Any name could be written). Click next. Phone Number: *99#. Click next. Leave User Name, Password, and Confirm Password fields blank. Click next. Click on "Add a shortcut to Desktop". Click on Finish. The system will automatically ask for Dial....just click on it & the system will get connected to NET automatically.

 
 

 
 

 
 

Steps to configure Belkin Wireless N router

Before accessing the web based setup page connect your router to the computer as shown in the figure.

 
 

 
 

Now unplug the power cable from the modem. Let the Belking router and the computer powered on. Steps to setup Belking Router by accessing the steup page are:

 
 

1. Access Belkin setup page

 
 

To access Belkin's web based setup page type 192.168.2.1 on the address bar of the browser.

 
 

The default IP address of Belkin Wireless N router F5D8233-4 is 192.168.2.1

 
 

 
 

2. Enter the password while it prompts

 
 

By default there is no password set for the router and you just simply click submit button to log on to router setup page.

 
 

 
 

 
 

3. Setup the connection type ( Internet WAN)

 
 

Click on Internet WAN and select the connection type you want.

 
 

If you select the Dynamic IP option the window will be like this.

 
 

4. Change the LAN settings

 
 

You can change the router IP address and you can enable or disable the DHCP function on the Belkin router using this window.

 
 

 
 

 
 

5. Setup Wireless feature

 
 

To edit the wireless settings click on Wireless tab in the setup page. You can edit the Wireless network name and wireless channel here.

 
 

 
 

6. Enable Wireless Security

 
 

To enable wireless security on Belkin router click on security under wireless tab.

 
 

 
 

Pasted from <http://www.corenetworkz.com/2009/07/setup-belkin-wireless-n-router-by.html>